Apex Fires Liberty 10 Frameless Open Fronted Gas Fire
Maximum heat output up to 6.2kW Fully sequential battery operated remote control as standard Dancing flame effect on a bed of Grey Gravel and Log Fuel Effect Comes with a Seamless no-frame design and Matt Black interior lining as standard 3D style reflective Black glass interior panel available as an optional extra to the rear of the fire which greatly enhances the flame effect & realism with additional flames reflecting off the Black glass panel to the rear of the fire (not the sides) which remain as standard in a Black metal painted finish Shown opposite with optional extra interior Black Glass Back panel Oxygen Depletion system monitors oxygen levels in the room as safety feature Optional extra gather hood and flue adaptor available (See optional extras below) Designed for homes with a class 1 chimney or 175mm metal prefabricated flue Additional ventilation into the room is required as the gas input is 12.5kW Natural gas version only Installation of this fire also requires a 300mm hearth in front of the appliance, although this may be at floor level (not included within the price of the fire) unless installed above 300mm from the floor Inset depth of 330mm Click here to view the Apex Liberty 10 Flue Adaptor Dimensional Drawing Click here to view the Apex Liberty 10 Installation Guide Free Delivery! Estimated delivery 15 working days		Product Reference: FPMS3393 Need a brochure? then click here usual price £1,999.00 Our Price £1,589.00 Best price on the net Seen the Apex Fires Liberty 10 Frameless Open Fronted Gas Fire cheaper? Then click here

Select your Hearth and/or Back

Apex Matt Black Back Panel (Sir) with black side panels

Apex Black Glass Back Panel (Sir) with black side panels + £159.00

Select your Fuel Effect

Apex Log

Select your Energy Type

Natural Gas (NG)

Select your Control

Select your Optional Extras

Apex Flue Adaptor for 175mm Flue liner For illustration purposes only + £179.00

usual price £1,999.00 Our Price £1,589.00 Best price on the net

Specification

Notes

		Width	Height	Depth	Inset Width	Inset Height	Inset Depth
Apex Cirrus X1		1020	530	30	865	455	295
Apex Cirrus X2 Black Nickel		742	514	30	603	452	290
Apex Cirrus X2		742	514	30	603	452	290
Apex Cirrus X2 Trimless		597	385	N/A	603	452	290
Apex Cirrus X3 Black Nickel		742	674	30	603	612	290
Apex Cirrus X3		742	674	30	603	612	290
Apex Cirrus X3 Trimless		597	545	N/A	603	612	290
Liberty 10 Frameless		998	257	N/A	1025	622	330

NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. Please note that soot deposits on a gas fire are to be expected and quite normal. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. All sizes in the table provided are in millimeters (mm). Due to the number of size measurements on this fire it is strongly recommended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to create any aperture in the wall to avoid potential mistakes being made. The Apex Fires Cirrus X2 is also referred/abbreviated to as the Apex 600 and the Apex Fires Cirrus X3 is also referred/abbreviated to the Apex 6x6 and the Apex Fires Liberty 10 is also referred/abbreviated to Apex & Liberty Frameless as seen in the manufacturers instructions which is all one of the same fire.

DELIVERY: The delivery service for the above Apex Fires products is based on a one man, kerbside, only delivery. Due to the nature and weight of these products, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your delivery address. Apex Fires are delivered on a pallet normally by a vehicle in excess of 7.5 tonnes or more so please ensure to advise us in writing by email if your property has any difficulties with access so alternative arrangements can be made to avoid incurring additional costs in the event a delivery cannot be made if the vehicle cannot deliver safely to your location.