Burley Environ Flueless Gas Fire
Maximum heat output 2.5Kw 100% efficient Realistic Coal fuel effect on all models except for the Environ 4247 version below which comes standard with Pebbles Manual control as standard with optional extra remote control facility Choice of either a Brick effect one side with Cream fireback on the other side or brick effect with black fireback on the other which can be reversed at time of installation Glass fronted catalytic flueless fire Choice of 5 finishes Designed for homes without a chimney or flue Minimum room size of 30m³ required together with additional ventilation of at least 100cm² (air vent included within the cost of this fire) Natural or Liquid Propane gas versions available Cavity wall box also included within the price of this fire as standard Outset Depth of 147mm when inset or 240mm fully outset with optional extra freestanding spacer kit (see details below)        LPG Option Free Delivery! Estimated delivery 10 working days		Product Reference: FPMS447 Need a brochure? then click here Seen the Burley Environ Flueless Gas Fire cheaper? Then click here Email this page to a friend

Select your Finish

Burley Environ 4240	Burley Environ 4242	Burley Environ 4244
Burley Environ 4247	Burley Environ 4248

Select your Hearth and Back

Select your Gas Type

Burley Natural Gas (NG)

Burley Propane Gas (LPG)

Select your Control

Manual Control *Image for illustration purposes only

Burley Environ Remote Control + £130.00

Select your Optional Extras

usual price £499.00 Our HotPrice £388.00 Best price on the net

Specification

External Dimensions H 612mm W 518mm D 147/240mm Inset Dimensions H 548mm W 385mm D 0/93mm OutPut Maximum heat output high 2.5Kw Maximum heat input high 2.5Kw

Details Contemporary or Traditional Flueless Gas Fire Flue Catalytic flueless gas fire which does not require any chimney or flue Ventilation A minimum 100 cm2 air vent is required

Notes

NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment.This Fire should not be installed in a room smaller than 30m^³ with built in ventilation of at least 100cm^² (air vent included with this fire as standard) and an openable window. Also note that this fire cannot be installed in a bathroom or bedroom. If you would like any of the above Environ fires to be completely freestanding you will need to order the optional extra infill product code (INFO141) and spacer kit which fits to the back of the fire. A cavity wall box is also included with this fire for use when recessing part of the fire into the wall. It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. Please be aware that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble fuel effect. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Burley themselves

For more detailed information about this product visit www.burley.co.uk