Gazco Designio Logic IPF Powerflue 16 Gas Fire
Maximum heat output 3.8Kw(NG) With an Efficiency rating of up to 62% (NG) Remote control as standard Coal fuel effect Open fronted inset fire External fan unit can either be recessed or wall mounted dependent on the overall wall depth and installation requirements Iridium (shown opposite) or Graphite finish Suitable for homes without a chimney or flue with an immediate external wall allowing the powerflue to vent horizontally directly through to the outside of the property Natural gas or LPG versions Minimum depth of 192mm fully inset required        LPG Option Free Delivery! Estimated delivery 10 working days		Need a brochure? then click here Email this page to a friend

Select your Finish

Gazco Graphite Finish

Gazco Iridium Finish

Select your Fuel Effect

Gazco Coals

Select your Gas Type

Gazco Natural Gas (NG)

Gazco Propane Gas (LPG)

Select your Control

Gazco IPF Sequential Remote

Please call us for a price on 0845 301 5552

Specification

External Dimensions H xmm W xmm D xmm Inset Dimensions H 560mm W 410mm D 192mm OutPut Maximum heat output (NG) high 3.8Kw Maximum heat input high 6.1Kw

Details Modern Powerflue Gas Fire Flue No chimney or flue required as this fire is a powered flue gas fire which vents horizontally directly through an immediate external wall

Notes
Frame Sizes

		Width	Height	Depth
Arts		510	605	50
Designio		595	615	68
Dimension		540	635	68
Evolution		489	597	68
Holyrood		490	600	50
Infiniti		620	710	75
Progress		520	598	60
Spanish		490	600	50
Richmond		540	635	50
Winchester		508	619	55
Decorative		505	610	50
Profil		490	600	50

Fret	Width	Height
Arts	390	230
Holyrood	385	265
Spanish	385	210

NOTE: Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment. The name of each Gazco gas fire i.e. Evolution relates to the design of the fascia frame / trim. Now as Gazco manufacture a range of different gas fires to go behind each fascia frame / trim, such as hot box fires, convector box fires, VFC convector box fires, open fronted and glass fronted gas fires, including balanced flue and powerflue fires. The fascia frame / trim may alter slightly in design by way of dimensions or a cross bar to cover any convection outlets on the fire. So, although the overall general appearance remains the same it must be appreciated that it is impossible to show images of each and every fire with every exact fascia frame / trim combination. We therefore suggest before purchasing that you contact Gazco for clarification and or visit a local retailer with a display to be sure you are happy with the overall apperance of the fire before proceeding to make any purchase. A powerflue or fanflue is an open fronted gas fire which has an electronically driven fan system mounted on the outside of the wall to expel the flue gases away safely. Although a sound from the fan when in operation is to be expected you may also experience some natural air circulation from the open flue when the fire is not in use which is quite normal. Please note in cases of power failure (power cuts) to your property this fire will not work. The fan electric supply can either be via a 13amp socket or fused switch spur installed by a qualified electrician. NOTE A marble slip with a minimum width of 150mm is recommended around all installations and no combustible material including wallpaper should be less than 150mm from this appliance. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Gazco themselves.

For more detailed information about this product visit www.gazco.co.uk. If you would like to view this product before you purchase, please contact Gazco directly, on 01392 261999, who will be able to advise you of your nearest dealer.