Brilliant Fires Advantage C3 Powerflue Gas Fire
Maximum heat output 3.9Kw Manual control as standard) with optional extra remote control available (see below) Coal, Pebble, Driftwood or Charcoal fuel effect Brushed Stainless Steel Finish Plain or brick effect black fireback which can be reversed at time of installation Open fronted inset Gas fire Suitable for homes without a chimney or flue with an immediate external wall allowing the powerflue to vent horizontally directly through to the outside of the property Natural gas or Propane gas available Advantage C3 powerflue shown opposite with Brushed Stainless Steel trim, Pebble fuel effect & Plain effect fireback Minimum depth of 222mm fully inset required        LPG Option Free Delivery! Estimated delivery 10 working days		Need a brochure? then click here Seen the Brilliant Fires Advantage C3 Powerflue Gas Fire cheaper? Then click here Email this page to a friend

Select your Fuel Effect

Brilliant Charcoal Advantage & Sensation Models Natural & Lpg Gas	Brilliant Coal Advantage, Innovation, Sensation Natural & Lpg Gas	Brilliant Driftwood Advantage & Sensation Models Natural & Lpg Gas
Brilliant Pebble Advantage, Innovation & Sensation Natural Gas Only

Select your Gas Type

Brilliant Natural Gas (NG)

Brilliant Propane Gas (LPG)

Select your Control

LFL Manual Rotary Control

LFL Battery Remote Control add £175.00

Select your Optional Extras

Our Price £549.00 inc VAT Best price on the net

Specification

External Dimensions H 616mm W 517mm D 12mm Inset Dimensions H 554mm W 398mm D 222mm OutPut Maximum heat output (NG) high 3.9Kw low 2.4Kw Maximum heat input high 7Kw low 4.1Kw (LPG) Maximum heat output high 3.2Kw low 2.4Kw Maximum heat input high 6.3Kw low 5.3Kw

Details Rear Venting Powerflue Flue No chimney or flue required as this fire is a powered flue gas fire which vents horizontally directly through an immediate external wall Ventilation An air vent is not normally required

Notes
NOTE: Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment. A powerflue or fanflue is an open fronted gas fire which has an electronically driven fan system mounted on the outside of the wall to expel the flue gases away safely. Although a sound from the fan when in operation is to be expected you may also experience some natural air circulation from the open flue when the fire is not in use which is quite normal. Please note in cases of power failure (power cuts) to your property this fire will not work. The fan electric supply can either be via a 13amp socket or fused switch spur installed by a qualified electrician. Maximum standard flue length supplied with the fire is 635mm, although this can be extended using the optional extra flue extension of 355mm extending up to a maximum of 990mm (Please ensure to check whether you require this before ordering, as the cost shown above in the extras section would be more expensive than shown if not ordered at the same time of ordering the fire). The slimline fan on the outside of the wall only protrudes by 57mm and does not require a guard although one is available at an additional cost please ask our sales team for further information. When installing the Advantage Powerflue you may need to choose a fireplace with a 3" rebate for additional depth dependent on the total amount of depth you have in your cavity wall. Also note that whilst this fire has the option of a remote control the fan is still controlled by a separate manual switch.

For more detailed information about this product visit www.brilliantfires.co.uk. If you would like to view this product before you purchase, please contact Brilliant directly, on 01254 682 384, who will be able to advise you of your nearest dealer.