Bemodern Classic Powerflue Gas Fire
Maximum heat output 4.8Kw Manual control as standard Choice of Coal or Pebble fuel effect (Pebble Fuel effect is only available with a Chrome Trim) 69.3% Efficient Choice of Black, Brass or Chrome fire trim Plain black fireback Open fronted inset fire Suitable for homes without a chimney or flue with an immediate external wall allowing the powerflue to vent horizontally directly through to the outside of the property Natural gas Only Classic Powerflue shown opposite with Chrome trim, Coal fuel effect & Plain black back Depth of 136mm fully inset required Free Delivery! Estimated delivery 10 working days Free Delivery to Ireland		Product Reference: FPMS2400 Need a brochure? then click here Seen the Bemodern Classic Powerflue Gas Fire cheaper? Then click here Email this page to a friend

Select your Finish

Bemodern Classic Chrome Gas Fire with Pebbles	Bemodern Classic Gas Fire Black	Bemodern Classic Gas Fire Brass
Bemodern Classic Gas Fire Chrome

Select your Gas Type

Natural Gas (NG)

Select your Control

Manual Control *Image for illustration purposes only

Select your Optional Extras

usual price £699.00 Our HotPrice £559.00 Best price on the net

Specification

External Dimensions H 600mm W 500mm D xmm Inset Dimensions H 585mm W 490mm D 136mm OutPut Maximum heat output (NG) high 4.8Kw low 1.5Kw Maximum heat input high 6.9Kw low 4.1Kw

Details Rear Venting Powerflue

Notes

NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment. A powerflue or fanflue is an open fronted gas fire which has an electronically driven fan system mounted on the outside of the wall to expel the flue gases away safely. Although a sound from the fan when in operation is to be expected you may also experience some natural air circulation from the open flue when the fire is not in use which is quite normal. Please note in cases of power failure (power cuts) to your property this fire will not work. The fan electric supply can either be via a 13amp socket or fused switch spur installed by a qualified electrician. The slimline fan on the outside of the wall only protrudes from the wall and does not require a guard although one is available at an additional cost please ask our sales team for further information. When installing the Advantage Powerflue you may need to choose a fireplace with a 3" rebate for additional depth dependent on the total amount of depth you have in your cavity wall.
You can view the full detailed instruction manual at the following link Bemodern Power-flue Installation instructions

For more detailed information about this product visit www.bemodern.co.uk