Drugasar Global 70 Slimline Balanced Flue Gas Fire
Maximum heat output 4.7Kw Up to 75% efficient Battery operated remote control as standard Rustic and Stylish Log fuel effect Realistic flame effect Glass fronted hole in the wall gas fire Choice of 3 frame options, Alpha a stylish narrow frame, Beta a Bold Statement Frame or alternatively a Frameless options for Contemporary Minimalist design with a Seamless finish Also available with the Dru MaxVent sytem, which provides an additional fan located within the convector box to push heat out further and quicker into the room ( additional depth & electrical supply needed) Concealed control hatch for backup operation Balanced flue gas fire (BF) designed primarily for homes without a chimney or flue with an immediate external wall. However a UK Chimney conversion kit is available (please read the notes section at the bottom of this page for further details about the "Standard Balanced flue kit" & "Chimney Conversion Kit" available at additonal cost with this fire) Natural or Liquid Propane Gas option Depth of 362/398mm fully inset        LPG Option Free Delivery! Estimated delivery 10 working days		Product Reference: FPMS2539 Need a brochure? then click here Email this page to a friend

Select your Trim

Global 70 Frameless	Global 70 Alpha	Global 70 Beta

Select your Hearth and Back

Select your Fuel Effect

Select your Gas Type

Drugasar Mains Natural Gas (NG)

Drugasar Propane Gas (LPG)

Select your Control

Drugasar Remote Control With Temperature Display

Select your Optional Extras

Dru Flat Roof Tile	Dru Universal Lead Roof Tile for Pitched Houses	Dru Lux Omni Lighting Kit (QTY 2) Code 906043 For use with brick or promatec breasts
Dru Lux Sleeve Vent Alu-Metallic QTY 2 Code 906048 For use with brick or promatec breasts	Dru Lux Sleeve Vent Ivory Code 906047 (2pc) For use with brick or promatec breasts	Dru Lux Omni Vent Alu-Metallic (QTY 2) Code 906045 For use with brick or promatec breasts
Dru Lux Omni Vent Ivory (QTY 2) Code 906044 For use with brick or promatec breasts	Dru Up & Out Standard Balanced Flue Kit 1000mm length, 90 degree bend, wall terminal kit	Dru 3 x 1000mm BF straight
Dru MaxVent System Electrical Supply Required	Dru Balanced Flue / Chimney Conversion Kit	Dru NON-STANDARD-BESPOKE Flue Kit Price Dependant upon Requirements

Product Callback click for further details	or call 0845 387 1122

Specification

Notes

NOTE:The delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment, Also ensure to study all the relevant information for installation of this appliance by reading the online installation & user instructions provided by Drugasar at www.drugasar.co.uk before proceeding to purchase, as we cannot accept any liability in the event that this product proves to be unsuitable for your needs or circumstances. When installing this product you will also need to construct a false chimney breast to accept the depth of the fire and line it with non combustable material. The standard balanced flue kit supplied with the fire comes off the top of the fire and raises up 1000mm minimum before venting horizontally at 90 degrees through the external wall. However there is a Chimney conversion kit available for standard 2 storey buildings of normal size & height to enable this fire to operate within an UK style Chimney breast, which consists of 1 short vertical flue / roof terminal, 1 flat roof tile aluminium plate, 10 metres of flexible 100mm flue pipe, 1 chimney closure plate, 1 flexible 100mm flue adaptor and 1 500mm concentric adjustable flue pipe 150/100 (NOTE: Additional flue pipe & accessories are available prices on request). This appliance comes standard with a temperature display remote control which allows the flame height to vary between high and low from your armchair with a fully automated electronic ignition. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time due to condensation that may form on the inside of the glass. Due to the number of size measurements and complexity of this fire it is strongly reccomended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to construct any any false walls or chimney breast to avoid potential mistakes being made. For more detailed information about this product including brochure requests simply click on www.druservice.co.uk