Drugasar Concerto Balanced Flue Gas Fire
Maximum heat output 4.9Kw Up to 77% efficient Battery operated remote control as standard Realistic flame effect Log fuel effect Glass fronted Balanced Flued gas fire Brick effect or Metal interior lining Choice of Anthracite, Sand Metallic, Alu Metallic or Stainless Steel (shown opposite with Alu Metallic frame, Metal interior lining & Log fuel effect) Natural gas only Depth of 382mm fully inset Free Delivery! Estimated delivery 18 working days		Need a brochure? then click here Email this page to a friend

Select your Finish

Dru Concerto Alu Metallic Finish	Dru Concerto Anthracite Finish	Dru Concerto Sand Metallic Finish
Dru Concerto Stainless Steel Finish £Call

Select your Hearth and Back

Dru Metal Lining

Drugasar Standard Brick Interior Lining Drugasar

Select your Fuel Effect

Drugasar Logs

Select your Gas Type

Drugasar Mains Natural Gas (NG)

Select your Control

Drugasar Remote Control With Temperature Display

Select your Optional Extras

Please call us for a price on 0845 301 5552

Specification

External Dimensions H 715mm W 809mm D 382mm Inset Dimensions H 690/740mm W 530mm D 288mm OutPut Maximum heat output high 4.9Kw

Details Contemporary Hang on the wall Balanced Flue Gas Fire Flue No chimney or flue required as this fire is a balanced flue gas fire which vents up vertically then horizontally directly through an external wall. This fire does not require any electrical supply as the remote control is battery operated Ventilation An air vent is not normally required

Notes
NOTE:The delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment Also ensure to study all the relevant information for installation of this appliance by reading the online installation & user instructions provided by Drugasar at www.drufire.co.uk before proceeding to purchase, as we cannot accept any liability in the event that this product proves to be unsuitable for your needs or circumstances. The standard balanced flue kit supplied with the fire comes off the top of the fire and raises up 1000mm minimum before venting horizontally at 90 degrees through the external wall. This fire also comes standard with an ornamental telescopic flue pipe cover which fits on top of the fire, stands vertically upwards and is designed to meet the ceiling. However this is subject to the overall height of the ceiling in the proposed room of installation as ceiling heights can vary from property to property. Please ensure you check your ceiling height in conjunction with this appliance and it's proposed position on the wall prior to ordering. As we cannot be held responsible if the flue cover and ceiling don't meet. This appliance also comes standard with a temperature display remote control which allows the flame height to vary between high and low from your armchair once the pilot has been ignited manually. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time due to condensation that may form on the inside of the glass. For more detailed information about this product including down loadable technical user & installation instructions, go to www.Drufire.co.uk