Drugasar Castello Balanced Flue Gas Fire
Maximum heat output 4.4Kw Up to 90% efficient Battery operated remote control as standard Realistic flame effect Glass fronted Balanced Flued gas fire Black Metal or Brick interior lining Shown opposite in Black, with Metal interior lining & Log fuel effect Natural gas only Balanced flue gas fire (BF) designed primarily for homes without a chimney or flue with an immediate external wall. However a UK Chimney conversion kit is available (please read the notes section at the bottom of this page for further details about the "Standard Balanced flue kit" & "Chimney Conversion Kit" available at additonal cost with this fire) Depth of 390mm fully inset Free Delivery! Estimated delivery 18 working days		Need a brochure? then click here Email this page to a friend

Select your Finish

Dru Black Drugasar

Select your Hearth and Back

Dru Metal Lining

Dru Standard Brick Lining

Select your Fuel Effect

Drugasar Logs

Select your Gas Type

Drugasar Mains Natural Gas (NG)

Select your Optional Extras

Dru 1 x 1000mm Additional Flue Length £Call	Dru Up & Out Standard Balanced Flue Kit 1000mm length, 90 degree bend, wall terminal kit£Call	Dru NON-STANDARD-BESPOKE Flue Kit Price Dependant upon Requirements£Call
Dru Balanced Flue / Chimney Conversion Kit £Call

Please call us for a price on 0845 301 5552

Specification

Notes

NOTE: The delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment Also ensure to study all the relevant information for installation of this appliance by reading the online installation & user instructions provided by Drugasar at www.drufire.co.uk before proceeding to purchase, as we cannot accept any liability in the event that this product proves to be unsuitable for your needs or circumstances. The standard balanced flue kit supplied with the fire comes off the top of the fire and raises up 1000mm minimum before venting horizontally at 90 degrees through the external wall. This fire also comes standard with an ornamental telescopic flue pipe cover which fits on top of the fire, stands vertically upwards and is designed to meet the ceiling. However this is subject to the overall height of the ceiling in the proposed room of installation as ceiling heights can vary from property to property. Please ensure you check your ceiling height in conjunction with this appliance and it's proposed position on the wall prior to ordering. As we cannot be held responsible if the flue cover and ceiling don't meet. This appliance also comes standard with a temperature display remote control which allows the flame height to vary between high and low from your armchair once the pilot has been ignited manually. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time due to condensation that may form on the inside of the glass. For more detailed information about this product including down loadable technical user & installation instructions, go to www.Drufire.co.uk or alternatively you can email a request for a brochure info@drufire.co.uk