Gazco Studio Glass Fronted with Logs
See the Flames

		Width	Height	Depth
Bauhaus		1060	534	28
Edge		1029	501	N/A
Profil		1046	520	13
Steel 2		1500	528	30
Glass 2		1500	528	33.5

NOTE: The delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. If you would like to see the overall dimensions relating to the size of this appliance, simply click on the following link Gazco Studio Glass Fronted Conventional Flue Installation Instructions to view them online, where they clearly indicate the maximum sizes you will need to create in the wall / chimney breast in order to install this product. ** A support stand with adjustable legs come as standard on this appliance to increase the base height where required on installation. Also be aware that if this Studio fire is installed with one of the Studio frames Bauhaus, Profil or Steel, then a 5mm space must be left around the front edge of the appliance. No additional fluing is needed when this fire is installed into an existing builders opening below a masonry chimney and sealed to the fireplace opening (assuming that the chimney is of sound construction). Alternatively this fire can be connected directly to a 5" inch liner within a brick chimney or a 5" inch twin wall gas vent system, which will also require the construction of a false chimney breast where applicable, in the room, to house the depth of the fire. The top flue outlet size for all Glass fronted conventional flue Studio fires is 127mm in diameter. The Gazco remote control included with this fire allows the flame height to vary between high and low from your armchair and has a fully automatic lighting sequence so there is no need to have a standing pilot as the fire will light directly from the handset. This unique remote also has a thermostatic option which enables you to programme the fire to heat the room to the temperature you select. In the event that you mislay the remote or the batteries run out don't worry, as there's even an electronic touch pad to access a manual control facility. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. NOTE **** Under no circumstances should a Plasma / LCD flat screen TV be mounted above this fire. Due to the number of size measurements on this fire it is strongly reccomended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to create any aperature in the wall to avoid potential mistakes being made.

For more detailed information about this product including down loadable technical user & installation instructions or to request a brochure visit www.gazco.com. If you would like to view this product before you purchase, please contact Gazco directly, on 01392 261999 info@gazco.co.uk, who will be able to advise you on your nearest dealer.