Gazco Studio Edge 1 Open Fronted 660mm Gas Fire
Maximum heat output 1.72Kw The Studio is one of the first hole in the wall gas fires of it's type, specifically designed to allow flat screen type televisions to be mounted on the wall above the fire*** Fully sequential battery operated remote control as standard with a manual, override, touch pad control, which can either be surface mounted on the wall or recessed in to the wall near the fire Dancing flame effect on a bed of White stones as standard Open fronted gas fire Comes standard with a Seamless no-frame design and either a Black metal interior lining as standard or optional extra polished Black granite interior lining Optional extra 178mm 7" diameter gather hood available Designed for homes with a class 1 chimney or 175mm metal prefabricated flue No additional ventilation into the room is required Natural or Liquid propane gas versions available Installation of this fire also requires a 100mm hearth in front of the appliance, although this may be at floor level (not included within the price of the fire) Depth of 312mm fully inset Studio Edge shown opposite without a frame to provide a seemless edge & optional extra polished Black granite interior lining Our showroom is easily accessible from Liverpool, Birmingham, Chester, Wrexham and Manchester        LPG Option Free Delivery! Estimated delivery 15 working days Options Gazco Manual Touch Control Panel Comes Standard		Product Reference: FPMS585 Need a brochure? then click here Email this page to a friend

Select your Hearth and Back

Gazco Studio Black Metal Lined Interior Gazco

Gazco Studio 1 Black Granite Lined Interior Gazco

Select your Fuel Effect

Gazco Studio Fire Range White Stones Fuel Effect

Select your Gas Type

Gazco Natural Gas (NG)

Gazco Propane Gas (LPG)

Select your Control

Gazco Sequential Remote Control

Select your Optional Extras

Gazco 7" Gather Hood Not Required

Gazco 7 Inch Gather Required

Showroom Exclusive Product click for further details

Specification

External Dimensions H See Table mm W See Table mm D See Table mm Inset Dimensions H 334/133**mm W 660mm D 312mm OutPut NG & LPG Maximum heat output high 1.72Kw Maximum heat output low 1.10Kw Maximum heat input high 6.9Kw Maximum heat input low 4Kw

Details Designer Hole In The Wall Gas Fire Flue Suitable for class 1 chimneys or 175mm metal prefabricated flue systems Ventilation An air vent is not normally required

Notes

		Width	Height	Depth
Bauhaus		764	439	28
Edge		0	0	0
Profil		750	429	13
Icon		880	2098	13
Firenza		1200	600	20
Pienza		1200	600	20
Sienna		1200	600	20
Kelper		1332	497	27
Geilo		1332	497	27
Inca		1200	559	27
Andes		1332	497	21
Link		1332	491	23
Steel 2		1118	478	14.5
Glass 1		1264	528	18

NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. If you would like to see the overall dimensions relating to the size of this appliance with or without the gather hood attached, simply click on the following link Gazco Studio Installation Instructions to view them online, where they clearly indicate the maximum sizes you will need to create in the wall / chimney breast in order to install this product. ** Adjustable legs come standard on this appliance to increase the base height from 133mm up to 235mm. Installation of a studio appliance also requires either a class 1 chimney or alternatively a false chimney breast which can be constructed in the room with a 175mm diameter metal flue system. The gather hood option is available if you are connecting to a prefabricated flue or in instances where the product is being installed into an open chimney without a liner, which will also help to minimise heat loss and soot / debris falls onto the fire. (GATHER HOOD NOT INCLUDED WITHIN THE COST OF THIS FIRE) IMPORTANT: Installation also requires a 100mm hearth in front of the appliance (as shown in the Gazco sales brochure), although this may be at floor level (HEARTH NOT INCLUDED WITHIN THE COST OF THIS FIRE). The Gazco remote control included with this fire allows the flame height to vary between high and low from your armchair and has a fully automatic lighting sequence so there is no need to have a standing pilot as the fire will light directly from the handset. In the event that you mislay the remote or the batteries run out don't worry, as there's even an electronic touch pad should you need to access a manual control facility. Andes, Inca, Kelper & Geilo are all made from a natural material. There will be variations in shading, and ocasionally, knots in the timbers used. This cannot be helped and is seen to emphaise the natural feel of the wood. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. NOTE **** If you are planning to put a television above this appliance and you have a normal flue with adequate draw on it, then it may be possible, as long as the distance to the TV is a minimum of 450mm from the top of the fire and as long as it has been checked with the TV manufacturers installation instructions with regard to installation and heat proximity. If in doubt please contact and check with your TV manufacturer. Due to the number of size measurements on this fire it is strongly reccomended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to create any aperature in the wall to avoid potential mistakes being made.

For more detailed information about this product including down loadable technical user & installation instructions or to request a brochure visit www.gazco.com. If you would like to view this product before you purchase, please contact Gazco directly, on 01392 261999 info@gazco.co.uk, who will be able to advise you on your nearest dealer.