Gazco Dimension Logic Hotbox 16 Gas Fire
Maximum heat output (NG) 3.2Kw Efficiency rating of up to 48% (NG) Manual control as standard with optional extra standard remote control available Coal or pebble fuel effect Open fronted inset fire Suitable for Class 1, 2, prefabricated** & precast flues* Natural & Propane gas versions available Depth of 215mm fully inset        LPG Option Free Delivery! Estimated delivery 10 working days		Need a brochure? then click here Email this page to a friend

Select your Fuel Effect

Gazco Coals

Gazco Pebbles

Select your Gas Type

Gazco Natural Gas (NG)

Gazco Propane Gas (LPG)

Select your Control

Gazco Rotary Manual Control

Gazco Standard Remote Control £Call

Select your Optional Extras

Please call us for a price on 0845 301 5552

Specification

External Dimensions H See Table mm W See Table mm D See Table mm Inset Dimensions H 560mm W 410mm D 215/250mm OutPut (NG) Maximum heat output high 3.2Kw Maximum heat input high 6.7Kw (LPG) Maximum heat output high 3.2Kw Maximum heat input high 6.7Kw

Details Modern Inset Gas Fire Flue Suitable for class 1 chimneys, class 2, prefabricated** & precast flues.* Ventilation An air vent is not normally required

Notes

Frame Sizes

		Width	Height	Depth
Arts		510	605	50
Designio		595	615	68
Dimension		540	635	68
Evolution		489	597	68
Holyrood		490	600	50
Infiniti		620	710	75
Progress		520	598	60
Spanish		490	600	50
Winchester		508	619	55
Decorative		505	610	50
Profil		490	600	50

Richmond front not suitable for the Hotbox 16"

Fret	Width	Height
Arts	390	230
Holyrood	385	265
Spanish	385	210

NOTE: Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. *If you intend to install this fire into a precast flue an optional extra spacer kit (price on application) and or a 3" 75mm deep rebated fire surround will be required. **Also due to the sheer number of varying flue boxes it is not possible to know which fires are suitable until such time as the exsisting fire has been removed. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. Gazco standard remote control option allows the flame height to vary between high and low from your armchair once the pilot has been ignited manually. Whereas the thermostatic remote offers all the same benefits as the standard remote control, you also have the added benefit of being able to programme the fire to switch itself on and off twice a day and to heat the room to the temperature you select.

For more detailed information about this product including down loadable technical user & installation instructions or to request a brochure visit www.gazco.com. If you would like to view this product before you purchase, please contact Gazco directly, on 01392 261999, who will be able to advise you on your nearest dealer.