Crystal Fires Jewel Gas Fire
Maximum heat output of upto 3.9Kw Manual or remote control option available at additional cost Choose from a classic Coal or modern pebble fuel effect Open fronted inset gas fire Stylish Polished silver finish Suitable for Class 1 , 2 & precast flues Natural gas only Depth of 175mm inset Now with 5 year manufacturers warrantee* Free Delivery! Estimated delivery 7 working days		Product Reference: FPMS150 Need a brochure? then click here Seen the Crystal Fires Jewel Gas Fire cheaper? Then click here Email this page to a friend

Select your Finish

Select your Control

Crystal Fires Manual Control

Crystal Fires Remote Control

Product Callback click for further details

Specification

External Dimensions H 584mm W 445mm D n /amm Inset Dimensions H 550mm W 391mm D 175mm OutPut Maximum heat output 3.9Kw

Flue Suitable for class 1 chimneys, class 2 & precast flues. Ventilation An air vent is not normally required

Notes
NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. Where there is insufficient depth a deep rebate surround may be required. This gas fire incorporates an oxygen depletion device in its flame supervision which cuts off the gas to the burner if oxygen levels in the room become too low. Please note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visable on a pebble fuel effect and or a light coloured fireback. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Crystal themselves

For more detailed information about this product visit www.crystalfires.co.uk