Bemodern Abbey Half Polished Gas Fire
Maximum heat output 3.5Kw Deluxe model, Slimline version 3.1Kw Manual control Coal fuel effect only Open fronted inset fire Half Full Polish and Black Cast finish Suitable for Class 1, 2 prefabricated & precast flues Natural gas only Depth of 120mm inset slimline version, 180mm inset Deluxe model Free Delivery! Estimated delivery 10 working days Options Abbey deluxe 180mm deep add £40.00 Abbey slimline 120mm deep		Product Reference: FPMS2313 Need a brochure? then click here Seen the Bemodern Abbey Half Polished Gas Fire cheaper? Then click here Email this page to a friend

Select your Fuel Effect

Our usual price £449.00 Special Offer £322.00 Best price on the net

Specification

External Dimensions H 716mm W 560mm D 80mm Inset Dimensions H 540mm W 400mm D 120/180mm OutPut Deluxe version high 3.5Kw low 1Kw Slimline version high 3.1Kw low 1Kw

Flue Both Deluxe & Slimline versions are suitable for class 1 chimneys, class 2 prefabricated & precast flues. Although a 78mm 3" deep rebated mantel will be required with the Deluxe version when installed into a precast flue. Ventilation An air vent is not normally required

Notes
NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. *Also due to the sheer number of varying flue boxes it is not possible to know which fires are suitable until such time as the exsisting fire has been removed. Please be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear. Ensure that the room in which the Cast product is being installed is thourghly dry e.g recently plastered walls cause high levels of moisture in the atsmosphere and, as a result, rust is almost inevitable. Under no circumstances should a Water-based cleaner or polish be used to clean products. Moisture is prone to dropping from the chimney, and is likely to cause corrosion. To minimise this it is recommended that you have your chimney swept clean and to seek advice from your Gas Safe Register engineer regarding the instalation of a chimney cowl. When using a gas fire, the products of combustion sometimes cause white deposits to form. These deposits can usually be removed with a soft brush. High temprature paint is used on all black finish items. This paint will edventually burn off. This can be maintained with our High Temperature Black paint available when purchasing the item.



For more detailed information about this product visit www.bemodern.co.uk