Smeg L30FAB Retro Flueless Gas Fire
Maximum heat output of up to 2.6Kw 100% efficient Stylish and Retro design available in different finishes in one size only Dancing flame effect Choice of 4 finishes either Cream, Black, Red or Silver Glass fronted catalytic flueless wall hung portrait gas fire With Oxygen Depletion Sensors & Flame Failure Device Designed for homes without a chimney or flue Mounts easily onto most internal walls Natural gas only Slimline depth of only 186mm projection into the room off the face of the wall Free Delivery! Estimated delivery 15 working days		Product Reference: FPMS1734 Need a brochure? then click here Seen the Smeg L30FAB Retro Flueless Gas Fire cheaper? Then click here Email this page to a friend

Select your Trim

Black L30FABBL	Cream L30FABCR	Red L30FABRE
Silver L30FABSI

Select your Gas Type

Natural Gas (NG)

Select your Control

Manual Control *Image for illustration purposes only

usual price £999.00 Our Price £579.00 Best price on the net

Specification

External Dimensions H See Tablemm W See Tablemm D See Tablemm Inset Dimensions H See Tablemm W See Tablemm D See Tablemm OutPut Maximum heat output high 2.6Kw (Dependant upon Model)

Details Contemporary Flueless Gas Fire Flue Catalytic flueless wall mounted gas fire Ventilation Specific to Product see Notes below

Notes

Hang On the Wall Flueless Fires
Name		Height	Width	Depth
Smeg L23CL Landscape Classic		480	702	149
Smeg L23LIN Landscape Linear		482	702	149
Smeg L30FAB Retro		550	800	186
Smeg P23LIN Portrait Linear		590	526	149
Smeg P23CL Portrait Classic		590	526	149

NOTE: Please note that all the above sizes are in millimetres (mm). NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your intended location and circumstances with this fire before making any purchase to avoid disappointment. Retro Range This Fire should not be installed in a room smaller than 30m³ with built in ventilation of at least 100cm² and an openable window. Linear & Classic Range This Fire should not be installed in a room smaller than 23m³ with built in ventilation of at least 100cm² and an openable window. Also note that this fire cannot be installed in a bathroom or bedroom. It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. Clearance Min of 100mm to each side, 800mm to ceiling, 500mm to the front of the fire and at least 60mm from the floor. Please be aware that traditional materials, such as polished steel and brass, tarnish on contact with air, especially when exposed to heat. To help contain this to a minimum, we recommend products receive regular treatments with suitable cleaners and polishes. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Smeg themselves.

For more detailed information about this product visit www.smeguk.com.